Need Help Choosing a Network Solution?
Network Products
An Ethernet-connected device enables fast, reliable data transmission over a network, supporting various communication protocols.
| Series | Part No. | Decription | Availability | Datasheet |
|---|---|---|---|---|
| Networked | ||||
| BBG-SSC-XXXXX-1G | BBG-SSC-XXXXX-1G | The BBG-SSC-XXXXX-1G (SSC) is a stand-alone system, which provides interfacing between an Ethernet interface and a dual channel Synchro interface. The SSC performs data format conversion of multicast Ethernet data into Synchro signals. The SSC was tested to and passed MIL-DIL-901E, MIL-STD-167-1A, MIL-STD-461G, and MIL-DTL-901E. Supports custom message formats including NMEA-0183 and NAVSSI OD19 messaging. |  |  |
| Data Acquisition PCA | BBG-7XXX-PCA | The BBG-7XXX-PCA is a standalone PCB module with an embedded NMEA processor, up to four synchro receive channels, and two synchro transmitters. The NMEA processor can be configured in the field to generate arbitrary sentences in real time over serial and ethernet. | | |
| Serial to Fiber Converter | BG-D2F-SPW1-RM | The BBG-D2F-SPW1-RM (D2F) is a stand-alone network interface system which provides data conversion between serial messages over RS-422, and NAVSSI via Fiber. Bulkhead version available. | | |
| Synchro Signal Converter | BBG-SSC | The BBG-SSC is a stand-alone network interface system that converts Ethernet data to a synchro output. | | |
| Ethernet to Fiber | BBG-SFP | The BBG-SFP (SFP) is an unmanaged three port Gigabit switch allowing high throughput communications between fiber and Ethernet devices. The unit provides one 10/100/1000Base-T RJ-45 port and two (2) 1000Base SFP Ports that can be configured according to the application. | | |
| Serial to Network Card | BBG-S2ENET | The S2ENET interface card is used to provide access to serial interfaces directly from a 10BaseT or 100BaseT network. The card is designed to allow the storage of web pages, also accessible from a network. This allows the card to provide web based manual pages, help pages, version, configuration information, tracking information, or just remote access to RS-232 serial interfaces. | | |
| Dual Serial to Network Card | BBG-S2ENET2 | The S2ENET interface card is used to provide access to serial interfaces directly from a 10BaseT or 100BaseT network. The card is designed to allow the storage of web pages, also accessible from a network. This allows the card to provide web based manual pages, help pages, version, configuration information, tracking information, or just remote access to RS-232 serial interfaces. | | |
| Legacy | ||||
| Network Interface Card | BBG-1553-TM | The BBG-1553-TM is an electronic interface enabling a computer on a 10/100BaseTX network to communicate with devices on a MIL-STD-1553 data bus. | | |
Work With Us Today