Home

 

BBG-SSBA
Serial to Synchro/Resolver Booster Amplifiers 

 

Introduction

 

Request Quote

The BBG-SSBA is a 6U VME FORMAT pc card which inputs a serial data message containing a speed or angular position. This information is processed by the onboard microcontroller and output in a synchro or resolver format. The BBG-SSBA is available in 25VA and 125VA output power configurations. An onboard microcontroller configures the card from power up or reset and provides all signals and controls to read the serial information and output the synchro/resolver information. Serial data formats, power outputs, synchro and resolver voltages and frequencies are factory configurable to user requirements.

Synchro information is passed over the serial data bus in a binary angle measurement format (BAM) as shown in Table 2 (on the data sheet). The BBG-SSBA accepts serial data in RS-232, RS-422, RS-423, RS-485, or MIL-STD-188C protocols. Serial baud rates are switch selectable at: 1200, 2400, 4800, 9600, and 19,200 bits per second. Default data output is 9600, 8 bits, no parity, and one stop bit (9600, 8, N, 1). Table 3 (on the data sheet) defines the switch position for the available baud rates. Custom serial data formats and frequencies are available upon request.

 

 

Specifications  

 

BBG-SSBA
Specifications
Power Supply Volts
MiliAmps

Volts

Amps

Volt

Amps

 

5
500

15

30 (125VA)
10 (25VA)

-15

30 (125VA)
10 (25VA)

Operating Temperature
Storage Temperature
C
C
0 to +50
-65 to +150
Physical Characteristics
6U VME Card
Inches
Centimeters
6.3 x 9.2 x 1.0
16 x 23.37 x 2.54

 

Overview

The BBG-SSBA is a 6U VME FORMAT pc card, which inputs a serial data message, a synchro, or a resolver data format containing a speed or angular position. This information is processed by the onboard microcontroller and output in a synchro or resolver format. The BBG-SSBA-25 has an output power of 25VA and the BBG-SSBA-125 has an output power of 125VA. An onboard microcontroller configures the card from power up or reset and provides all signals and control to read the input information and output the synchro/resolver information. Serial data formats, power outputs, synchro and resolver voltages and frequencies are factory configured to user requirements.

The BBG-SSBA accepts serial data in RS-232, RS-422, RS-423, RS-485, or MIL-STD-188C protocols. Serial baud rates are switch selectable at: 2400, 4800, 9600, 19,200, and 38,400 bits per second. Default serial input is 9600, 8 bits, no parity, and one stop bit (9600, 8, N, 1). Custom data formats, voltages and frequencies are available upon request.

 

 
Data Sheet

If you need more information, click on the link below for the data sheet.  For any questions or to request a quote, click on the "Request Quote" Icon or the "Contact Us" button on the side bar.

Data Sheet

 

     Request Quote

 

Synchro Products
Serial Products
Radar Products
Other Products
About BBG
News
Contact Us
bbg@bbginc.com  | 1708 South Park Court, Chesapeake, VA 23320 | Voice: (757) 366-9211 | Fax: (757) 366-9170