Home

 

BBG-550/550D
Bulkhead Mount, or Rack Mount, Serial to

Synchro/Resolver Interface

 

Introduction

 

Request Quote

 

  • Serial Input, Two-Speed Synchro/Resolver and Serial Outputs
  • NMEA Type 12/13 or 19 inch Rack Mount Enclosure
  • NMEA-0183 Compatible Outputs
  • RS-232, RS-422, RS-423, RS-485, MIL-STD-188C Protocols
  • AC Input Filtered and Circuit Breaker Protected

The BBG-550 is a bulkhead mount NMEA 12/13, or 19 inch rack mount enclosure which converts angular information from a serial data message into three outputs: a two speed synchro or resolver output and a NMEA-0183 serial data format.

The serial data input/output uses the NMEA 0183 message structures and supports RS-232, RS-422, RS-423, RS-485, and MIL-STD-188C protocols. Custom message formats are available upon request.

Power input, serial input, reference inputs, synchro/resolver outputs, and serial outputs are available on standard militarized connectors. Synchro outputs are virtually indestructible incorporating current limiting, short circuit protection, over voltage transient protection, and thermal cutoff. AC input power is filtered and circuit breaker protected.

The BBG-550D includes a backlighted Liquid Crystal Display (LCD) which provides a visual indication of the synchro angle outputs.

 

 


Card Layout
 

 

 

 

Technical Specification  
 
Specifications
Power Input Volts
Hertz
Milliamps
115
60
500
Operating Temperature
Storage Temperature
C
C
0 to +50
-65 to +150
Physical Characteristics

Bulkhead mount

Rack mount

 

Enclosure (in.)
Mounting (in.)

Enclosure (in.)

 

16 x 14 x 6
16.75 x 12.00

19 x 19.5 x 3.5

 

 
Overview
The BBG-550 is a bulkhead mount NMEA 12/13, or 19 inch rack mount enclosure which converts angular information from a serial data message into three outputs: a two speed synchro or resolver output and a NMEA-0183 serial data format.

The two speed synchro or resolver outputs are factory configurable to user defined voltages and frequencies. Outputs are transformer isolated and fully protected against overloads, transients from load kickbacks, short circuits and overheating.

The serial data output is transmitted over RS232 and RS422 interfaces using the NMEA-0183 message structure.  This output is transmitted over both RS-232 and RS-422 interfaces. Input and output baud rates are switch selectable on the Digital to Synchro Processor housed internal to the BBG-550. Selectable baud rates include: 1200, 2400, 4800, 9600, and 19,200 bits per second. Default data output is 9600, 8 bits, no parity, and one stop bit (9600, 8, N, 1).

 

 

Data Sheet

If you need more information, click on the link below for the data sheet.  For any questions or to request a quote, click on the "Request Quote" Icon or the "Contact Us" button on the side bar.

Data Sheet

 

 

     Request Quote

Synchro Products
Serial Products
Radar Products
Other Products
About BBG
News
Contact Us
bbg@bbginc.com  | 1708 South Park Court, Chesapeake, VA 23320 | Voice: (757) 366-9211 | Fax: (757) 366-9170